Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC3446160/YA3
- 1 pcs
- Negotiable
- Bearing FCDP168232840/YA6
- 1 pcs
- Negotiable
- Bearing FCDP212272800/YA6
- 1 pcs
- Negotiable
- Bearing FC182870
- 1 pcs
- Negotiable
- Bearing FCDP142200715/YA6
- 1 pcs
- Negotiable
- Bearing FCD84124400/YA6
- 1 pcs
- Negotiable
- Bearing FC2640104/YA3
- 1 pcs
- Negotiable
- Bearing FCD5068230
- 1 pcs
- Negotiable
- Bearing FCDP170236850A/YA6
- 1 pcs
- Negotiable
- Bearing FC3045120
- 1 pcs
- Negotiable
- Bearing FCDP76108300/YA6
- 1 pcs
- Negotiable
- Bearing FC3653180/YA3
- 1 pcs
- Negotiable