Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC243692
- 1 pcs
- Negotiable
- Bearing FC5884300/YA3
- 1 pcs
- Negotiable
- Bearing FC76100290/YA3
- 1 pcs
- Negotiable
- Bearing FCDP92130355/YA6
- 1 pcs
- Negotiable
- Bearing FCD4062230/YA3
- 1 pcs
- Negotiable
- Bearing FCDP96136420/YA6
- 1 pcs
- Negotiable
- Bearing FCDP138196750/YA6
- 1 pcs
- Negotiable
- Bearing FC6890250/YA3
- 1 pcs
- Negotiable
- Bearing FCDP122170570/YA6
- 1 pcs
- Negotiable
- Bearing FCD4466230/YA3
- 1 pcs
- Negotiable
- Bearing FCDP112164600A/YA6
- 1 pcs
- Negotiable
- Bearing FC223490
- 1 pcs
- Negotiable