Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC3854170/YA3
- 1 pcs
- Negotiable
- Bearing FCDP92130470/YA6
- 1 pcs
- Negotiable
- Bearing FC72102400
- 1 pcs
- Negotiable
- Bearing FCDP4673250
- 1 pcs
- Negotiable
- Bearing FCDP6692340/YA3
- 1 pcs
- Negotiable
- Bearing FCDP70100410/YA6
- 1 pcs
- Negotiable
- Bearing FC6284300/YA3
- 1 pcs
- Negotiable
- Bearing FCD4462215/YA3
- 1 pcs
- Negotiable
- Bearing FC3450150
- 1 pcs
- Negotiable
- Bearing FCD92134500/YA3
- 1 pcs
- Negotiable
- Bearing FCDP114166600/YA6
- 1 pcs
- Negotiable
- Bearing FCDP118164590/YA6
- 1 pcs
- Negotiable