3L12 DELCO NDH SINGLE ROW DEEP GROOVE BALL BEARING w/ SNAP RING

How 140x80x26 Size (mm) do I place 140 Bore Diameter (mm) an EMERGENCY order for a 140x80x26 3L12 DELCO NDH SINGLE ROW DEEP GROOVE BALL BEARING w/ SNAP RING that I want to pick up at Bearing Wholesalers a our store?

Bearing number:7216 ACD/HCP4A
Size (mm):140x80x26
Bore Diameter (mm):140
Outer Diameter (mm):80
Width (mm):26
d:80 mm
D:140 mm
B:26 mm

Product Details

Bearing number7216 ACD/HCP4A
Size (mm)140x80x26
Bore Diameter (mm)140
Outer Diameter (mm)80
Width (mm)26
d80 mm
D140 mm
B26 mm
d199.5 mm
d299.5 mm
D1120.5 mm
r1,2 - min.2 mm
r3,4 - min.1 mm
a38.8 mm
da - min.91 mm
db - min.91 mm
Da - max.129 mm
Db - max.134.4 mm
ra - max.2 mm
rb - max.1 mm
dn103.4 mm
Basic dynamic load rating - C81.9 kN
Basic static load rating - C072 kN
Fatigue load limit - Pu2.9 kN
Limiting speed for grease lubrication10000 r/min
Limiting speed for oil lubrication17000 mm/min
Ball - Dw17.462 mm
Ball - z17
Gref18.084 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA520 N
Preload class B - GB1040 N
Preload class C - GC2080 N
Preload class D - GD4160 N
Calculation factor - f1.09
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.03
Calculation factor - f2D1.06
Calculation factor - fHC1.01
Preload class A286 N/micron
Preload class B337 N/micron
Preload class C445 N/micron
Preload class D600 N/micron
r1,2 min.2 mm
r3,4 min.1 mm
da min.91 mm
db min.91 mm
Da max.129 mm
Db max.134.4 mm
ra max.2 mm
rb max.1 mm
Basic dynamic load rating C81.9 kN
Basic static load rating C072 kN
Fatigue load limit Pu2.9 kN
Attainable speed for grease lubrication10000 r/min
Attainable speed for oil-air lubrication17000 r/min
Ball diameter Dw17.462 mm
Number of balls z17
Reference grease quantity Gref18.084 cm³
Preload class A GA520 N
Static axial stiffness, preload class A286 N/µm
Preload class B GB1040 N
Static axial stiffness, preload class B337 N/µm
Preload class C GC2080 N
Static axial stiffness, preload class C445 N/µm
Preload class D GD4160 N
Static axial stiffness, preload class D600 N/µm
Calculation factor f1.09
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.06
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing1.24 kg
View more

Company Profile

Worktime 9: 00-18: 00 (بتوقيت بكين)
Phone +6531591338
Fax +6531591338
View more

Related News

  • First, the installation of spherical roller bearings Spherical roller bearings must be installed in a dry, clean environment. The mating surface of the shaft and the outer casing, the end faces of the shoulders, the grooves and the joining surface...
  • The circular motion of steel balls has been applied to the "linear guide" of linear guides for about 35 years. Manufacturers at home and abroad sell various kinds of products, though they are similar in appearance, but they have different uses in different...
  • With the widespread application of maintenance free technology, stainless steel bearings are widely used in food machinery, daily machinery and various corrosion resistant fields. special Not in the micro bearings, deep groove ball bearings and outer...
  • Recommended Products

    Skype Contact Now