BSPG1560SL Precision Linear Slide 15x60x8mm

YOU’LL FIND 55x30x13 AN Bearing Wholesalers EXTENSIVE SELECTION OF BSPG1560SL Precision Linear Slide 15x60x8mm 55x30x13 Size (mm) FOR SALE.

Bearing number:7006 ACB/HCP4A
Size (mm):55x30x13
Bore Diameter (mm):55
Outer Diameter (mm):30
Width (mm):13
d:30 mm
D:55 mm
B:13 mm
PDF

Product Details

Bearing number7006 ACB/HCP4A
Size (mm)55x30x13
Bore Diameter (mm)55
Outer Diameter (mm)30
Width (mm)13
d30 mm
D55 mm
B13 mm
d139.45 mm
d238.3 mm
D247.25 mm
r1,2 - min.1 mm
r3,4 - min.0.6 mm
a16.5 mm
da - min.34.6 mm
db - min.34.6 mm
Da - max.50.4 mm
Db - max.51.8 mm
ra - max.1 mm
rb - max.0.6 mm
dn40 mm
Basic dynamic load rating - C6.2 kN
Basic static load rating - C03.9 kN
Fatigue load limit - Pu0.166 kN
Limiting speed for grease lubrication40000 r/min
Limiting speed for oil lubrication60000 mm/min
Ball - Dw4.762 mm
Ball - z20
Gref1.4 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA36 N
Preload class B - GB72 N
Preload class C - GC215 N
Calculation factor - f1.03
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.02
Calculation factor - f2C1.05
Calculation factor - fHC1.01
Preload class A64 N/micron
Preload class B82 N/micron
Preload class C124 N/micron
r1,2 min.1 mm
r3,4 min.0.6 mm
da min.34.6 mm
db min.34.6 mm
Da max.50.4 mm
Db max.51.8 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C8.32 kN
Basic static load rating C06.7 kN
Fatigue load limit Pu0.166 kN
Attainable speed for grease lubrication40000 r/min
Attainable speed for oil-air lubrication60000 r/min
Ball diameter Dw4.762 mm
Number of balls z20
Reference grease quantity Gref1.4 cm³
Preload class A GA36 N
Static axial stiffness, preload class A64 N/µm
Preload class B GB72 N
Static axial stiffness, preload class B82 N/µm
Preload class C GC215 N
Static axial stiffness, preload class C124 N/µm
Calculation factor f1.03
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.05
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.13 kg
View more

Company Profile

Worktime 9: 00-18: 00 (بتوقيت بكين)
Phone +6531591338
Fax +6531591338
View more

Related News

  • First, the installation of spherical roller bearings Spherical roller bearings must be installed in a dry, clean environment. The mating surface of the shaft and the outer casing, the end faces of the shoulders, the grooves and the joining surface...
  • The circular motion of steel balls has been applied to the "linear guide" of linear guides for about 35 years. Manufacturers at home and abroad sell various kinds of products, though they are similar in appearance, but they have different uses in different...
  • With the widespread application of maintenance free technology, stainless steel bearings are widely used in food machinery, daily machinery and various corrosion resistant fields. special Not in the micro bearings, deep groove ball bearings and outer...
  • Recommended Products

    Skype Contact Now