SF4411PX1 Excavator Bearing / Angular Contact Bearing 220x290x32mm

Advance SF4411PX1 Excavator Bearing / Angular Contact Bearing 220x290x32mm is 105x75x16 105x75x16 Size (mm) your source for quality Bearing Wholesalers Mud pump bearings and accessories. shop online for home delivery or pick up in one of our 10000 .

Bearing number:S71915 ACB/HCP4A
Size (mm):105x75x16
Bore Diameter (mm):105
Outer Diameter (mm):75
Width (mm):16
d:75 mm
D:105 mm
B:16 mm

Product Details

Bearing numberS71915 ACB/HCP4A
Size (mm)105x75x16
Bore Diameter (mm)105
Outer Diameter (mm)75
Width (mm)16
d75 mm
D105 mm
B16 mm
d185.94 mm
d284.55 mm
D297.5 mm
r1,2 - min.1 mm
r3,4 - min.0.6 mm
a32.3 mm
da - min.79.6 mm
da - max.85.2 mm
db - min.79.6 mm
db - max.83.9 mm
Da - max.100 mm
Db - max.101.8 mm
ra - max.1 mm
rb - max.0.6 mm
Basic dynamic load rating - C13.3 kN
Basic static load rating - C012.5 kN
Fatigue load limit - Pu0.52 kN
Limiting speed for grease lubrication18000 r/min
Ball - Dw6.35 mm
Ball - z34
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA80 N
Preload class B - GB160 N
Preload class C - GC480 N
Calculation factor - f1.11
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.02
Calculation factor - f2C1.08
Calculation factor - fHC1.01
Preload class A135 N/micron
Preload class B173 N/micron
Preload class C262 N/micron
r1,2 min.1 mm
r3,4 min.0.6 mm
da min.79.6 mm
da max.85.2 mm
db min.79.6 mm
db max.83.9 mm
Da max.100 mm
Db max.101.8 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C17.8 kN
Basic static load rating C020 kN
Fatigue load limit Pu0.52 kN
Attainable speed for grease lubrication18000 r/min
Ball diameter Dw6.35 mm
Number of balls z34
Preload class A GA80 N
Static axial stiffness, preload class A135 N/µm
Preload class B GB160 N
Static axial stiffness, preload class B173 N/µm
Preload class C GC480 N
Static axial stiffness, preload class C262 N/µm
Calculation factor f1.11
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.08
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.36 kg
View more

Company Profile

Worktime 9: 00-18: 00 (بتوقيت بكين)
Phone +6531591338
Fax +6531591338
View more

Related News

  • First, the installation of spherical roller bearings Spherical roller bearings must be installed in a dry, clean environment. The mating surface of the shaft and the outer casing, the end faces of the shoulders, the grooves and the joining surface...
  • The circular motion of steel balls has been applied to the "linear guide" of linear guides for about 35 years. Manufacturers at home and abroad sell various kinds of products, though they are similar in appearance, but they have different uses in different...
  • With the widespread application of maintenance free technology, stainless steel bearings are widely used in food machinery, daily machinery and various corrosion resistant fields. special Not in the micro bearings, deep groove ball bearings and outer...
  • Recommended Products

    Skype Contact Now