TAS 1-1/4 Inch Bearing Housed Unit

With over 10170 full-service stores, our TAS 1-1/4 Inch Bearing Housed Unit Bearing Wholesalers 30x10x9 inventory is extensive and our parts are priced 30x10x9 Size (mm) right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.

Bearing number:7200 CD/P4A
Size (mm):30x10x9
Bore Diameter (mm):30
Outer Diameter (mm):10
Width (mm):9
d:10 mm
D:30 mm
B:9 mm
PDF

Product Details

Bearing number7200 CD/P4A
Size (mm)30x10x9
Bore Diameter (mm)30
Outer Diameter (mm)10
Width (mm)9
d10 mm
D30 mm
B9 mm
d117.3 mm
d217.3 mm
D123.1 mm
r1,2 - min.0.6 mm
r3,4 - min.0.3 mm
a7.3 mm
da - min.14.2 mm
db - min.14.2 mm
Da - max.25.8 mm
Db - max.27.6 mm
ra - max.0.6 mm
rb - max.0.3 mm
dn18.3 mm
Basic dynamic load rating - C4.5 kN
Basic static load rating - C01.9 kN
Fatigue load limit - Pu0.08 kN
Limiting speed for grease lubrication60000 r/min
Limiting speed for oil lubrication90000 mm/min
Ball - Dw4.762 mm
Ball - z10
Gref0.357 cm3
Calculation factor - f08.8
Preload class A - GA17 N
Preload class B - GB34 N
Preload class C - GC68 N
Preload class D - GD136 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.03
Calculation factor - f2D1.05
Calculation factor - fHC1
Preload class A14 N/micron
Preload class B19 N/micron
Preload class C26 N/micron
Preload class D37 N/micron
CategoryBearings
Inventory0.0
Minimum Buy QuantityN/A
UNSPSC31171531
Weight / Kilogram0.03
Product GroupB00308
r1,2 min.0.6 mm
r3,4 min.0.3 mm
da min.14.2 mm
db min.14.2 mm
Da max.25.8 mm
Db max.27.6 mm
ra max.0.6 mm
rb max.0.3 mm
Basic dynamic load rating C4.49 kN
Basic static load rating C01.93 kN
Fatigue load limit Pu0.08 kN
Attainable speed for grease lubrication60000 r/min
Attainable speed for oil-air lubrication90000 r/min
Ball diameter Dw4.762 mm
Number of balls z10
Reference grease quantity Gref0.357 cm³
Preload class A GA17 N
Static axial stiffness, preload class A14 N/µm
Preload class B GB34 N
Static axial stiffness, preload class B19 N/µm
Preload class C GC68 N
Static axial stiffness, preload class C26 N/µm
Preload class D GD136 N
Static axial stiffness, preload class D37 N/µm
Calculation factor f1.02
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.05
Calculation factor fHC1
Calculation factor f08.8
Mass bearing0.032 kg
View more

Company Profile

Worktime 9: 00-18: 00 (بتوقيت بكين)
Phone +6531591338
Fax +6531591338
View more

Related News

  • First, the installation of spherical roller bearings Spherical roller bearings must be installed in a dry, clean environment. The mating surface of the shaft and the outer casing, the end faces of the shoulders, the grooves and the joining surface...
  • The circular motion of steel balls has been applied to the "linear guide" of linear guides for about 35 years. Manufacturers at home and abroad sell various kinds of products, though they are similar in appearance, but they have different uses in different...
  • With the widespread application of maintenance free technology, stainless steel bearings are widely used in food machinery, daily machinery and various corrosion resistant fields. special Not in the micro bearings, deep groove ball bearings and outer...
  • Recommended Products

    Skype Contact Now