| Bearing number | 7002 ACD/HCP4AH |
| Size (mm) | 32x15x9 |
| Bore Diameter (mm) | 32 |
| Outer Diameter (mm) | 15 |
| Width (mm) | 9 |
| d | 15 mm |
| D | 32 mm |
| B | 9 mm |
| d1 | 20.6 mm |
| d2 | 20.6 mm |
| D1 | 26.4 mm |
| K | 0.5 mm |
| C1 | 5.35 mm |
| r1,2 - min. | 0.3 mm |
| r3,4 - min. | 0.2 mm |
| a | 10.1 mm |
| da - min. | 17 mm |
| db - min. | 17 mm |
| Da - max. | 30 mm |
| Db - max. | 30.6 mm |
| ra - max. | 0.3 mm |
| rb - max. | 0.2 mm |
| dn | 21.5 mm |
| Basic dynamic load rating - C | 4.9 kN |
| Basic static load rating - C0 | 2.3 kN |
| Fatigue load limit - Pu | 0.098 kN |
| Limiting speed for grease lubrication | 60000 r/min |
| Limiting speed for oil lubrication | 95000 mm/min |
| Ball - Dw | 4.762 mm |
| Ball - z | 12 |
| Gref | 0.39 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 30 N |
| Preload class B - GB | 60 N |
| Preload class C - GC | 120 N |
| Preload class D - GD | 240 N |
| Calculation factor - f | 1.03 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.02 |
| Calculation factor - f2C | 1.05 |
| Calculation factor - f2D | 1.08 |
| Calculation factor - fHC | 1.02 |
| Preload class A | 46 N/micron |
| Preload class B | 59 N/micron |
| Preload class C | 77 N/micron |
| Preload class D | 102 N/micron |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.2 mm |
| da min. | 17 mm |
| db min. | 17 mm |
| Da max. | 30 mm |
| Db max. | 30.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.2 mm |
| Basic dynamic load rating C | 4.94 kN |
| Basic static load rating C0 | 2.32 kN |
| Fatigue load limit Pu | 0.098 kN |
| Attainable speed for grease lubrication | 60000 r/min |
| Attainable speed for oil-air lubrication | 95000 r/min |
| Ball diameter Dw | 4.762 mm |
| Number of balls z | 12 |
| Reference grease quantity Gref | 0.39 cm³ |
| Preload class A GA | 30 N |
| Static axial stiffness, preload class A | 46 N/µm |
| Preload class B GB | 60 N |
| Static axial stiffness, preload class B | 59 N/µm |
| Preload class C GC | 120 N |
| Static axial stiffness, preload class C | 77 N/µm |
| Preload class D GD | 240 N |
| Static axial stiffness, preload class D | 102 N/µm |
| Calculation factor f | 1.03 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.02 |
| Calculation factor f2C | 1.05 |
| Calculation factor f2D | 1.08 |
| Calculation factor fHC | 1.02 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.027 kg |
SSAFS 22516 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22517 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22516 T SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22517 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22516 SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22517 T SAF and SAW pillow blocks with bearings on an adapter sleeve