FYWK 1.3/16 YTH Y-bearing square flanged units

FYWK 1.3/16 YTH Y-bearing square flanged units 210x140x33 Product 210 Bore Diameter (mm) Brochures , Bearing in Singapore Manufacturing Service . Bearing Wholesalers Get Your Free.

Bearing number:7028 ACD/HCP4A
Size (mm):210x140x33
Bore Diameter (mm):210
Outer Diameter (mm):140
Width (mm):33
d:140 mm
D:210 mm
B:33 mm
PDF

Product Details

Bearing number7028 ACD/HCP4A
Size (mm)210x140x33
Bore Diameter (mm)210
Outer Diameter (mm)140
Width (mm)33
d140 mm
D210 mm
B33 mm
d1161.6 mm
d2161.6 mm
D1188.4 mm
r1,2 - min.2 mm
r3,4 - min.1 mm
a57.5 mm
da - min.149 mm
db - min.149 mm
Da - max.201 mm
Db - max.205 mm
ra - max.2 mm
rb - max.1 mm
dn166.3 mm
Basic dynamic load rating - C146 kN
Basic static load rating - C0156 kN
Fatigue load limit - Pu5.1 kN
Limiting speed for grease lubrication7000 r/min
Limiting speed for oil lubrication11000 mm/min
Ball - Dw22.225 mm
Ball - z22
Gref45 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA900 N
Preload class B - GB1800 N
Preload class C - GC3600 N
Preload class D - GD7200 N
Calculation factor - f1.16
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.02
Calculation factor - f2C1.05
Calculation factor - f2D1.08
Calculation factor - fHC1.02
Preload class A404 N/micron
Preload class B530 N/micron
Preload class C702 N/micron
Preload class D950 N/micron
r1,2 min.2 mm
r3,4 min.1 mm
da min.149 mm
db min.149 mm
Da max.201 mm
Db max.205 mm
ra max.2 mm
rb max.1 mm
Basic dynamic load rating C146 kN
Basic static load rating C0156 kN
Fatigue load limit Pu5.1 kN
Attainable speed for grease lubrication7000 r/min
Attainable speed for oil-air lubrication11000 r/min
Ball diameter Dw22.225 mm
Number of balls z22
Reference grease quantity Gref45 cm³
Preload class A GA900 N
Static axial stiffness, preload class A404 N/µm
Preload class B GB1800 N
Static axial stiffness, preload class B530 N/µm
Preload class C GC3600 N
Static axial stiffness, preload class C702 N/µm
Preload class D GD7200 N
Static axial stiffness, preload class D950 N/µm
Calculation factor f1.16
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.05
Calculation factor f2D1.08
Calculation factor fHC1.02
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing2.83 kg
View more

Company Profile

Bearing Wholesalers
Worktime 9: 00-18: 00 (بتوقيت بكين)
Phone +6531591338
Fax +6531591338
View more

Related News

  • Installation and disassembly of Spherical roller bearing
    First, the installation of spherical roller bearings Spherical roller bearings must be installed in a dry, clean environment. The mating surface of the shaft and the outer casing, the end faces of the shoulders, the grooves and the joining surface...
  • Selection of THK linear guide
    The circular motion of steel balls has been applied to the "linear guide" of linear guides for about 35 years. Manufacturers at home and abroad sell various kinds of products, though they are similar in appearance, but they have different uses in different...
  • Design Essentials and materials of common stainless steel bearings
    With the widespread application of maintenance free technology, stainless steel bearings are widely used in food machinery, daily machinery and various corrosion resistant fields. special Not in the micro bearings, deep groove ball bearings and outer...

    • Recommended Products

    Skype Contact Now
    Contact Us