FAG Axial deep groove ball bearings - 2009
YOU’LL 28 Bore Diameter (mm) FIND AN Bearing Wholesalers EXTENSIVE SELECTION OF FAG Axial deep groove ball bearings - 2009 FOR 28x15x7 SALE.
| Bearing number: | 71902 ACE/P4AH |
| Size (mm): | 28x15x7 |
| Bore Diameter (mm): | 28 |
| Outer Diameter (mm): | 15 |
| Width (mm): | 7 |
| d: | 15 mm |
| D: | 28 mm |
| B: | 7 mm |
| PDF |
|
Product Details
| Bearing number | 71902 ACE/P4AH |
| Size (mm) | 28x15x7 |
| Bore Diameter (mm) | 28 |
| Outer Diameter (mm) | 15 |
| Width (mm) | 7 |
| d | 15 mm |
| D | 28 mm |
| B | 7 mm |
| d1 | 19.1 mm |
| d2 | 18.1 mm |
| D1 | 23.9 mm |
| K | 0.5 mm |
| C1 | 4.3 mm |
| r1,2 - min. | 0.3 mm |
| r3,4 - min. | 0.15 mm |
| a | 9.1 mm |
| da - min. | 17 mm |
| db - min. | 17 mm |
| Da - max. | 26 mm |
| Db - max. | 27.2 mm |
| ra - max. | 0.3 mm |
| rb - max. | 0.15 mm |
| dn | 20 mm |
| Basic dynamic load rating - C | 3 kN |
| Basic static load rating - C0 | 1.3 kN |
| Fatigue load limit - Pu | 0.057 kN |
| Limiting speed for grease lubrication | 68000 r/min |
| Limiting speed for oil lubrication | 106000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 12 |
| Gref | 0.2 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 28 N |
| Preload class B - GB | 84 N |
| Preload class C - GC | 170 N |
| Calculation factor - f | 1.04 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.04 |
| Calculation factor - f2C | 1.07 |
| Calculation factor - fHC | 1 |
| Preload class A | 34 N/micron |
| Preload class B | 51 N/micron |
| Preload class C | 66 N/micron |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.15 mm |
| da min. | 17 mm |
| db min. | 17 mm |
| Da max. | 26 mm |
| Db max. | 27.2 mm |
| ra max. | 0.3 mm |
| rb max. | 0.15 mm |
| Basic dynamic load rating C | 3.02 kN |
| Basic static load rating C0 | 1.34 kN |
| Fatigue load limit Pu | 0.057 kN |
| Attainable speed for grease lubrication | 68000 r/min |
| Attainable speed for oil-air lubrication | 106000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 12 |
| Reference grease quantity Gref | 0.2 cm³ |
| Preload class A GA | 28 N |
| Static axial stiffness, preload class A | 34 N/µm |
| Preload class B GB | 84 N |
| Static axial stiffness, preload class B | 51 N/µm |
| Preload class C GC | 170 N |
| Static axial stiffness, preload class C | 66 N/µm |
| Calculation factor f | 1.04 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.04 |
| Calculation factor f2C | 1.07 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.015 kg |
Company Profile
| Worktime |
9: 00-18: 00 (بتوقيت بكين) |
| Phone |
+6531591338 |
| Fax |
+6531591338 |
