Bearing ZS07-75
Roll Bearings for Mills NSK offers a 101.6 mm da Bearing ZS07-75 selection 200 mm Da of Genuine Roll Bearings for Mills NSK at Wholesale Prices. We are a Bearing ZS07-75 Bearing Wholesalers Certified Parts Retailer
| da: | 101.6 mm |
| Da: | 200 mm |
| Ca: | 62.89 mm |
| A1: | 120.65 mm |
| A2: | 231.775 mm |
| S: | 4.763 mm |
| ba: | 50.006 mm |
| H: | 244.475 mm |
Product Details
| da | 101.6 mm |
| Da | 200 mm |
| Ca | 62.89 mm |
| A1 | 120.65 mm |
| A2 | 231.775 mm |
| S | 4.763 mm |
| ba | 50.006 mm |
| H | 244.475 mm |
| H1 | 125.425 mm |
| H2 | 52.388 mm |
| L | 419.1 mm |
| R1 | 67.866 mm |
| R2 | 31.75 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 45.244 mm |
| Housing | SSAFS 522 |
| Stabilizing ring | SR-22-19 |
| Taconite seal | TER 110 |
| End plug (suffix Y) | EPR 13 |
| Max. speed for Taconite seal | 775 r/min |
| P60° | 178 kN |
| P90° | 107 kN |
| P120° | 66.7 kN |
| P150° | 59.6 kN |
| P180° | 72.5 kN |
| Pa | 17.3 kN |
| Mass pillow block | 54 kg |
| Cap bolt | 5/8-11 UNC |
| Cap bolt recommended tightening torque | 298.3 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Initial grease fill | 232.47 g |
Company Profile
| Worktime |
9: 00-18: 00 (بتوقيت بكين) |
| Phone |
+6531591338 |
| Fax |
+6531591338 |
