LM30GA Linear Bearing 30x45x64mm

Shop LM30GA Linear Bearing 30x45x64mm huge online discount Crushing Equipment bearing inventory. Crushing Equipment bearing and Import machinery parts your car needs with 26x9x8 Free 26x9x8 Size (mm) Shipping and Free Extended Bearing Wholesalers Warranty.

Bearing number:729 ACD/HCP4A
Size (mm):26x9x8
Bore Diameter (mm):26
Outer Diameter (mm):9
Width (mm):8
d:9 mm
D:26 mm
B:8 mm

Product Details

Bearing number729 ACD/HCP4A
Size (mm)26x9x8
Bore Diameter (mm)26
Outer Diameter (mm)9
Width (mm)8
d9 mm
D26 mm
B8 mm
d115.1 mm
d215.1 mm
D120.9 mm
r1,2 - min.0.3 mm
r3,4 - min.0.2 mm
a8.3 mm
da - min.11.4 mm
db - min.11.4 mm
Da - max.23.6 mm
Db - max.24.2 mm
ra - max.0.3 mm
rb - max.0.2 mm
dn16.3 mm
Basic dynamic load rating - C4 kN
Basic static load rating - C01.6 kN
Fatigue load limit - Pu0.067 kN
Limiting speed for grease lubrication70000 r/min
Limiting speed for oil lubrication110000 mm/min
Ball - Dw4.762 mm
Ball - z9
Gref0.258 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA25 N
Preload class B - GB50 N
Preload class C - GC100 N
Preload class D - GD200 N
Calculation factor - f1.02
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.03
Calculation factor - f2D1.06
Calculation factor - fHC1.01
Preload class A36 N/micron
Preload class B46 N/micron
Preload class C60 N/micron
Preload class D79 N/micron
r1,2 min.0.3 mm
r3,4 min.0.2 mm
da min.11.4 mm
db min.11.4 mm
Da max.23.6 mm
Db max.24.2 mm
ra max.0.3 mm
rb max.0.2 mm
Basic dynamic load rating C3.97 kN
Basic static load rating C01.6 kN
Fatigue load limit Pu0.067 kN
Attainable speed for grease lubrication70000 r/min
Attainable speed for oil-air lubrication110000 r/min
Ball diameter Dw4.762 mm
Number of balls z9
Reference grease quantity Gref0.258 cm³
Preload class A GA25 N
Static axial stiffness, preload class A36 N/µm
Preload class B GB50 N
Static axial stiffness, preload class B46 N/µm
Preload class C GC100 N
Static axial stiffness, preload class C60 N/µm
Preload class D GD200 N
Static axial stiffness, preload class D79 N/µm
Calculation factor f1.02
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.06
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.018 kg
View more

Company Profile

Worktime 9: 00-18: 00 (بتوقيت بكين)
Phone +6531591338
Fax +6531591338
View more

Related News

  • First, the installation of spherical roller bearings Spherical roller bearings must be installed in a dry, clean environment. The mating surface of the shaft and the outer casing, the end faces of the shoulders, the grooves and the joining surface...
  • The circular motion of steel balls has been applied to the "linear guide" of linear guides for about 35 years. Manufacturers at home and abroad sell various kinds of products, though they are similar in appearance, but they have different uses in different...
  • With the widespread application of maintenance free technology, stainless steel bearings are widely used in food machinery, daily machinery and various corrosion resistant fields. special Not in the micro bearings, deep groove ball bearings and outer...
  • Recommended Products

    Skype Contact Now