Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCD4460200
- 1 pcs
- Negotiable
- Bearing FC3652156
- 1 pcs
- Negotiable
- Bearing FC72102400
- 1 pcs
- Negotiable
- Bearing FC5676192
- 1 pcs
- Negotiable
- Bearing FC4056170/YA3
- 1 pcs
- Negotiable
- Bearing FC3856200/YA3
- 1 pcs
- Negotiable
- Bearing FCD70104300
- 1 pcs
- Negotiable
- Bearing FC88118270/YA3
- 1 pcs
- Negotiable
- Bearing FC6490240/YA3
- 1 pcs
- Negotiable
- Bearing FC2640110/YA3
- 1 pcs
- Negotiable
- Bearing FCDP106156570A/YA6
- 1 pcs
- Negotiable
- Bearing FC5884300/YA3
- 1 pcs
- Negotiable