Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC4050200
- 1 pcs
- Negotiable
- Bearing FC5478220
- 1 pcs
- Negotiable
- Bearing FCDP96136500A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP134174530/YA6
- 1 pcs
- Negotiable
- Bearing FC6492340/YA3
- 1 pcs
- Negotiable
- Bearing FC3652120
- 1 pcs
- Negotiable
- Bearing FC6084240A/YA3
- 1 pcs
- Negotiable
- Bearing FCDP84120440/YA3
- 1 pcs
- Negotiable
- Bearing FC2443174/YA3
- 1 pcs
- Negotiable
- Bearing FCDP68100370/YA6
- 1 pcs
- Negotiable
- Bearing FC3854166
- 1 pcs
- Negotiable
- Bearing FC84116230/YA3
- 1 pcs
- Negotiable