Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP80112400/YA6
- 1 pcs
- Negotiable
- Bearing FC5888310/YA3
- 1 pcs
- Negotiable
- Bearing FC5280300/YA3
- 1 pcs
- Negotiable
- Bearing FC2842100
- 1 pcs
- Negotiable
- Bearing FC4870220
- 1 pcs
- Negotiable
- Bearing FCDP82114450/YA6
- 1 pcs
- Negotiable
- Bearing FCD6892260
- 1 pcs
- Negotiable
- Bearing FC3450170/YA3
- 1 pcs
- Negotiable
- Bearing FC2030106
- 1 pcs
- Negotiable
- Bearing FCD80108440/YA3
- 1 pcs
- Negotiable
- Bearing FCDP76108400/YA3
- 1 pcs
- Negotiable
- Bearing FC2842106
- 1 pcs
- Negotiable