Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP100136450/YA6
- 1 pcs
- Negotiable
- Bearing FC2838119
- 1 pcs
- Negotiable
- Bearing FC6688200
- 1 pcs
- Negotiable
- Bearing FCDP6084300/YA3
- 1 pcs
- Negotiable
- Bearing FC3045136/YA3
- 1 pcs
- Negotiable
- Bearing FC5276220
- 1 pcs
- Negotiable
- Bearing FCDP130184680/YA6
- 1 pcs
- Negotiable
- Bearing FCD4462204/YA3
- 1 pcs
- Negotiable
- Bearing FCDP106152520A/YA6
- 1 pcs
- Negotiable
- Bearing FC3650168/YA3
- 1 pcs
- Negotiable
- Bearing FCDP96130340/YA3
- 1 pcs
- Negotiable
- Bearing FCDP106156570/YA6
- 1 pcs
- Negotiable