Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC3045150/YA3
- 1 pcs
- Negotiable
- Bearing FC3248120/YA3
- 1 pcs
- Negotiable
- Bearing FCDP2403241150/YA6
- 1 pcs
- Negotiable
- Bearing FC5684290/YA3
- 1 pcs
- Negotiable
- Bearing FC2842106
- 1 pcs
- Negotiable
- Bearing FCDP156214780/YA6
- 1 pcs
- Negotiable
- Bearing FCD6080300/YA3
- 1 pcs
- Negotiable
- Bearing FCD84116320/YA3
- 1 pcs
- Negotiable
- Bearing FCDP78108320/YA6
- 1 pcs
- Negotiable
- Bearing FCDP130184690/YA6
- 1 pcs
- Negotiable
- Bearing FCDP96136420/YA6
- 1 pcs
- Negotiable
- Bearing FC2640104/YA3
- 1 pcs
- Negotiable