Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP120174640A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP96130460/YA3
- 1 pcs
- Negotiable
- Bearing FCDP122174660/YA6
- 1 pcs
- Negotiable
- Bearing FC5272200/YA3
- 1 pcs
- Negotiable
- Bearing FCD84112400
- 1 pcs
- Negotiable
- Bearing FCD84124400/YA6
- 1 pcs
- Negotiable
- Bearing FCDP100136450/YA6
- 1 pcs
- Negotiable
- Bearing FC3852168/YA3
- 1 pcs
- Negotiable
- Bearing FCDP130184690/YA6
- 1 pcs
- Negotiable
- Bearing FCDP70100460/YA3
- 1 pcs
- Negotiable
- Bearing FCDP96130450/YA6
- 1 pcs
- Negotiable
- Bearing FCDP140186620/YA6
- 1 pcs
- Negotiable