Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- 3322M.C3 Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable
- NAG4907 IKO Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- 442377D Deep Groove Ball Bearing Double Row
- 1 pcs
- Negotiable
- 3305 Budget Double Row Angular Contact Ball Bearing 25x62x25.4mm
- 1 pcs
- Negotiable
- 43032RS Budget Sealed Double Row Deep Groove Ball Bearing 17x47x19mm
- 1 pcs
- Negotiable
- 3302 Budget Double Row Angular Contact Ball Bearing 15x42x19mm
- 1 pcs
- Negotiable
- 42072RS Budget Sealed Double Row Deep Groove Ball Bearing 35x72x23mm
- 1 pcs
- Negotiable
- F16029 Rubber Sealed Double Row Wheel Bearing 37x72x33mm
- 1 pcs
- Negotiable
- NN3014M.SP FAG Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- 1314 NSK Nippon Seiko Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable