Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- 1223BR Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 42092RS Budget Sealed Double Row Deep Groove Ball Bearing 45x85x23mm
- 1 pcs
- Negotiable
- 3307A/C3 Angular Contact Ball Bearing Double Row
- 1 pcs
- Negotiable
- RNAO25x35x26 Double Row Needle Roller Bearing No Shaft Sleeve
- 1 pcs
- Negotiable
- 1314K/C4 Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 1216K NTN Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 7214B Koyo Angular Contact Ball Bearing Double Row
- 1 pcs
- Negotiable
- 3204 5204 20x47x20.6mm Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable
- 42102RS Budget Sealed Double Row Deep Groove Ball Bearing 50x90x23mm
- 1 pcs
- Negotiable
- NAG4926 IKO Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable