FSE 511-609 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
FSE 511-609 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals Needs Analysis , Bearing in Singapore 30 Bore Diameter (mm) Manufacturing Service . Bearing Wholesalers Get Your Free. 30x10x9
| Bearing number: | S7200 ACD/P4A |
| Size (mm): | 30x10x9 |
| Bore Diameter (mm): | 30 |
| Outer Diameter (mm): | 10 |
| Width (mm): | 9 |
| d: | 10 mm |
| D: | 30 mm |
| B: | 9 mm |
| PDF |
|
Product Details
| Bearing number | S7200 ACD/P4A |
| Size (mm) | 30x10x9 |
| Bore Diameter (mm) | 30 |
| Outer Diameter (mm) | 10 |
| Width (mm) | 9 |
| d | 10 mm |
| D | 30 mm |
| B | 9 mm |
| d1 | 17.3 mm |
| d2 | 17.3 mm |
| D2 | 24.3 mm |
| r1,2 - min. | 0.6 mm |
| r3,4 - min. | 0.3 mm |
| a | 9.3 mm |
| da - min. | 14.2 mm |
| da - max. | 16.7 mm |
| db - min. | 14.2 mm |
| db - max. | 16.7 mm |
| Da - max. | 25.8 mm |
| Db - max. | 27.6 mm |
| ra - max. | 0.6 mm |
| rb - max. | 0.3 mm |
| Basic dynamic load rating - C | 4.4 kN |
| Basic static load rating - C0 | 1.9 kN |
| Fatigue load limit - Pu | 0.078 kN |
| Limiting speed for grease lubrication | 53000 r/min |
| Ball - Dw | 4.762 mm |
| Ball - z | 10 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 27 N |
| Preload class B - GB | 54 N |
| Preload class C - GC | 108 N |
| Preload class D - GD | 216 N |
| Calculation factor - f | 1.02 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.01 |
| Calculation factor - f2C | 1.02 |
| Calculation factor - f2D | 1.05 |
| Calculation factor - fHC | 1 |
| Preload class A | 35 N/micron |
| Preload class B | 45 N/micron |
| Preload class C | 59 N/micron |
| Preload class D | 78 N/micron |
| r1,2 min. | 0.6 mm |
| r3,4 min. | 0.3 mm |
| da min. | 14.2 mm |
| da max. | 16.7 mm |
| db min. | 14.2 mm |
| db max. | 16.7 mm |
| Da max. | 25.8 mm |
| Db max. | 27.6 mm |
| ra max. | 0.6 mm |
| rb max. | 0.3 mm |
| Basic dynamic load rating C | 4.36 kN |
| Basic static load rating C0 | 1.86 kN |
| Fatigue load limit Pu | 0.078 kN |
| Attainable speed for grease lubrication | 53000 r/min |
| Ball diameter Dw | 4.762 mm |
| Number of balls z | 10 |
| Preload class A GA | 27 N |
| Static axial stiffness, preload class A | 35 N/µm |
| Preload class B GB | 54 N |
| Static axial stiffness, preload class B | 45 N/µm |
| Preload class C GC | 108 N |
| Static axial stiffness, preload class C | 59 N/µm |
| Preload class D GD | 216 N |
| Static axial stiffness, preload class D | 78 N/µm |
| Calculation factor f | 1.02 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.01 |
| Calculation factor f2C | 1.02 |
| Calculation factor f2D | 1.05 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.032 kg |
Company Profile
| Worktime |
9: 00-18: 00 (بتوقيت بكين) |
| Phone |
+6531591338 |
| Fax |
+6531591338 |
SSAFS 22516 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22517 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22516 T SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22517 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22516 SAF and SAW pillow blocks with bearings on an adapter sleeve
SSAFS 22517 T SAF and SAW pillow blocks with bearings on an adapter sleeve