TRIPLEX MUD PUMP bearing ZB10236
-
Performance: An advanced fluid end design gives exceptionally smooth Triplex performance. This unique design facilitates fast inspection and easy servicing.
-
Flexibility: Compact engineering provides higher efficiency in less space. The pump's light weight and flexible design make it easily adaptable to a variety of rig configurations. This provides flexibility as drilling requirements and conditions change.
-
Fluid End Modules: NOV offers a choice of fluid end modules and valve covers for every P Series pump model to select the fluid end module that exactly matches drilling requirements. All pump models can be equipped with either the standard or premium forged, two-piece interchangeable fluid modules.
Power End:
-
Fabricated steel frame construction
-
One-piece forged steel construction crankshaft, connecting rods and pinion shaft
-
Adapability to a variety of drive arrangements on either side or both sides
-
Premium roller bearings to enhance smooth performance and efficiency
-
Pressurized lubrication system standard on 14-P-220 model
Fluid End:
-
Two-piece modular cylinder design is completely interchangeable between modules
-
Fast Change™ screw-type valve covers which facilitate quick removal and installation are standard
-
Suction manifold can be equipped with front or side inlet connections
-
Discharge piping connects from either side
-
Piston and liner chambers are easily accessible and fully open
-
Two-piece piston rod construction allows removal of piston without disturbing liner
-
Easy-to-operate clamps give positive locking for liners and piston rod assemblies
-
Spray system cools and lubricates piston and liner surfaces
Height, floor to center of front inlet suction, inches (mm) | 19-7/8" (505) |
Height, floor to center of discharge, inches (mm) | 49-1/4" (1251) |
Overall length over skids, inches (mm) | 218-1/4" (5544) |
Width over frame, inches (mm) | 91" (2311) |
Width over pinion shaft, inches (mm) | 125-3/4" (3194) |
Height, floor to top of gear case, inches (mm) | 84-1/4" (2139 |
Height over fluid cylinders, inches (mm) | 69-1/8" (1756) |
Max. input, horsepower (kW) | 2200 (1640) |
Rated pump speed, spm | 105 |
Maximum fluid cylinder line bore*, inches (mm) | 9" (228.6) |
Stroke, inches (mm) | 14" (355.6) |
Hydrostatic test pressure of standard fluid cylinders, psi (kg/cm²) | 10,000 (703) |
Ratio of gears | 3.969 |
Suction connection, ASA-150 lb. R.J. flange, inches | 10" |
Discharge connection, cross w/API-5000 lb. R.J. flange, inches | 6" |
Valve pot, API number | MOD.8 |
Weight-complete, less sheave, lbs. (kg) | 86,000 (39,007) |
32644H | ZT-11812 | 12GF20 | 7602-0210-37 | AD4814D |
154836 | ZT-10003 | 12BA6 | 7602-0213-05 | ADA426334 |
5G254936Q | 7602-0210-95/96 ) | 12W84 | 6301-0038-00 | AD5144 |
254941QU | 7602-0210-95/96 | 12W85 | 6397-0267-00 | AD4814D |
254735Q | 65-101-775 | 12BA6 | 7602-0212-90 | ADA42603 |
354935Q | 65-101-958 | 12BA6 | 7602-0212-91 | AD5144 |
5G354920Q | 65-101-954 | 12W84 | 65-725-034 | AD4812DO |
23160C3/W33 | IB-666/491-35 | 12W85 | 65-725-080 | AD4540D |
24072CA/W33 | IB-306/3693B | 12BA18 | 65-725-020 | ADA42002 |
24060CA/W33 | ZB-9005 | 12BA5 | 65-725-957 | AD4633D |
24056CA/W33 | ZB-8253 | 12AM3 | 65-725-936 | ADA42201 |
10929/630U | ZB-7370 | 12BA44 | 65-725-959 | AD5238X |
10029/630U | ZB-7120 | 12BA19 | 65-725-960 | AD4814D |
10129/630U | ZB-6751 | 12W73 | 65-725-000 | AD5148 |
10929/670U | ZB-5620 | 12W60 | 65-725-010 | MUC5136 |
10929/710U | ZB-11028 | 12W58 | IB-1331 | E-5140-UMR |
20929/530 | ZB-10236 | 12W75 | IB-1330 | MUC5144 |
20329/530 | ZB-8662 | 12GF20 | IB-1334 | MUC5144 |
20929/500 | ZB-7873 | 65-725-936 | IB-1332 | W-4482 |
20329/500 | ZB-7081 | 65-725-959 | IB-657 | MUC5136 |