Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC5676192
- 1 pcs
- Negotiable
- Bearing FC80110300/YA3
- 1 pcs
- Negotiable
- Bearing FC2030106
- 1 pcs
- Negotiable
- Bearing FCD4464210/YA3
- 1 pcs
- Negotiable
- Bearing FCDP200272800A/YA6
- 1 pcs
- Negotiable
- Bearing FC3046150
- 1 pcs
- Negotiable
- Bearing FC5476230/YA3
- 1 pcs
- Negotiable
- Bearing FCDP150200670/YA6
- 1 pcs
- Negotiable
- Bearing FCDP100140515/YA6
- 1 pcs
- Negotiable
- Bearing FCDP2703701150/YA6
- 1 pcs
- Negotiable
- Bearing FCDP112160600/YA6
- 1 pcs
- Negotiable
- Bearing FCDP100144400
- 1 pcs
- Negotiable