Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCD5476275
- 1 pcs
- Negotiable
- Bearing FCD6896350/YA3
- 1 pcs
- Negotiable
- Bearing FCD5068230
- 1 pcs
- Negotiable
- Bearing FC3448160/YA3
- 1 pcs
- Negotiable
- Bearing FC4260210
- 1 pcs
- Negotiable
- Bearing FC3046150
- 1 pcs
- Negotiable
- Bearing FCDP146206750/YA6
- 1 pcs
- Negotiable
- Bearing FCDP78108320/YA6
- 1 pcs
- Negotiable
- Bearing FCDP120164575/YA6
- 1 pcs
- Negotiable
- Bearing FCD74104400/YA3
- 1 pcs
- Negotiable
- Bearing FCD78110400
- 1 pcs
- Negotiable
- Bearing FCDP76108300/YA6
- 1 pcs
- Negotiable