Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- 43082RS Budget Sealed Double Row Deep Groove Ball Bearing 40x90x33mm
- 1 pcs
- Negotiable
- Nachi Bearing 5311 Double Row Angular Contact Bearing
- 1 pcs
- Negotiable
- 4212 Budget Double Row Deep Groove Ball Bearing 60x110x28mm
- 1 pcs
- Negotiable
- 43042RS Budget Sealed Double Row Deep Groove Ball Bearing 20x52x21mm
- 1 pcs
- Negotiable
- 42062RS Budget Sealed Double Row Deep Groove Ball Bearing 30x62x20mm
- 1 pcs
- Negotiable
- 43012RS Budget Sealed Double Row Deep Groove Ball Bearing 12x37x17mm
- 1 pcs
- Negotiable
- NTN 5308C3 double row ball bearing 40mm x 90mm x 37mm
- 1 pcs
- Negotiable
- 43022RS Budget Sealed Double Row Deep Groove Ball Bearing 15x42x17mm
- 1 pcs
- Negotiable