Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- NSK 38BWD06D1 Double Row Ball Bearing
- 1 pcs
- Negotiable
- 4304A SNR Deep Groove Ball Bearing Double Row
- 1 pcs
- Negotiable
- 18.25 x 24.25 x 25 Double Row Torrington Bearing Needle Roller
- 1 pcs
- Negotiable
- MRC 5207CG Ball Bearing Double Row STEEL C3 ABEC-1
- 1 pcs
- Negotiable
- RM10L FAG Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- NNCF5034CV Rollway Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- 1316 NSK Nippon Seiko Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 1304 NSK Nippon Seiko Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 5334.9.prZ J 36.9mm id x 53.4mm x 32.2mm wide,DOUBLE ROW BEARINGS
- 1 pcs
- Negotiable