TAS 1-1/4 Inch Bearing Housed Unit
With over 10170 full-service stores, our TAS 1-1/4 Inch Bearing Housed Unit Bearing Wholesalers 30x10x9 inventory is extensive and our parts are priced 30x10x9 Size (mm) right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Bearing number: |
7200 CD/P4A |
| Size (mm): |
30x10x9 |
| Bore Diameter (mm): |
30 |
| Outer Diameter (mm): |
10 |
| Width (mm): |
9 |
| d: |
10 mm |
| D: |
30 mm |
| B: |
9 mm |
| PDF |
|
Product Details
| Bearing number |
7200 CD/P4A |
| Size (mm) |
30x10x9 |
| Bore Diameter (mm) |
30 |
| Outer Diameter (mm) |
10 |
| Width (mm) |
9 |
| d |
10 mm |
| D |
30 mm |
| B |
9 mm |
| d1 |
17.3 mm |
| d2 |
17.3 mm |
| D1 |
23.1 mm |
| r1,2 - min. |
0.6 mm |
| r3,4 - min. |
0.3 mm |
| a |
7.3 mm |
| da - min. |
14.2 mm |
| db - min. |
14.2 mm |
| Da - max. |
25.8 mm |
| Db - max. |
27.6 mm |
| ra - max. |
0.6 mm |
| rb - max. |
0.3 mm |
| dn |
18.3 mm |
| Basic dynamic load rating - C |
4.5 kN |
| Basic static load rating - C0 |
1.9 kN |
| Fatigue load limit - Pu |
0.08 kN |
| Limiting speed for grease lubrication |
60000 r/min |
| Limiting speed for oil lubrication |
90000 mm/min |
| Ball - Dw |
4.762 mm |
| Ball - z |
10 |
| Gref |
0.357 cm3 |
| Calculation factor - f0 |
8.8 |
| Preload class A - GA |
17 N |
| Preload class B - GB |
34 N |
| Preload class C - GC |
68 N |
| Preload class D - GD |
136 N |
| Calculation factor - f |
1 |
| Calculation factor - f2A |
1 |
| Calculation factor - f2B |
1.01 |
| Calculation factor - f2C |
1.03 |
| Calculation factor - f2D |
1.05 |
| Calculation factor - fHC |
1 |
| Preload class A |
14 N/micron |
| Preload class B |
19 N/micron |
| Preload class C |
26 N/micron |
| Preload class D |
37 N/micron |
| Category |
Bearings |
| Inventory |
0.0 |
| Minimum Buy Quantity |
N/A |
| UNSPSC |
31171531 |
| Weight / Kilogram |
0.03 |
| Product Group |
B00308 |
| r1,2 min. |
0.6 mm |
| r3,4 min. |
0.3 mm |
| da min. |
14.2 mm |
| db min. |
14.2 mm |
| Da max. |
25.8 mm |
| Db max. |
27.6 mm |
| ra max. |
0.6 mm |
| rb max. |
0.3 mm |
| Basic dynamic load rating C |
4.49 kN |
| Basic static load rating C0 |
1.93 kN |
| Fatigue load limit Pu |
0.08 kN |
| Attainable speed for grease lubrication |
60000 r/min |
| Attainable speed for oil-air lubrication |
90000 r/min |
| Ball diameter Dw |
4.762 mm |
| Number of balls z |
10 |
| Reference grease quantity Gref |
0.357 cm³ |
| Preload class A GA |
17 N |
| Static axial stiffness, preload class A |
14 N/µm |
| Preload class B GB |
34 N |
| Static axial stiffness, preload class B |
19 N/µm |
| Preload class C GC |
68 N |
| Static axial stiffness, preload class C |
26 N/µm |
| Preload class D GD |
136 N |
| Static axial stiffness, preload class D |
37 N/µm |
| Calculation factor f |
1.02 |
| Calculation factor f1 |
1 |
| Calculation factor f2A |
1 |
| Calculation factor f2B |
1.01 |
| Calculation factor f2C |
1.03 |
| Calculation factor f2D |
1.05 |
| Calculation factor fHC |
1 |
| Calculation factor f0 |
8.8 |
| Mass bearing |
0.032 kg |
Company Profile
| Worktime |
9: 00-18: 00 (بتوقيت بكين) |
| Phone |
+6531591338 |
| Fax |
+6531591338 |