SYNT 90 LTF Roller bearing plummer block units, for metric shafts
Question SYNT 90 LTF Roller bearing plummer block units, for metric shafts ? Find what you need faster Cylindrical bore Bore Type by entering your Bearing Wholesalers Bearing in Singapore information . 1 5/8 in Shaft Size d
Product Details
Shaft Size d | 1 5/8 in |
Bore Type | Cylindrical bore |
Bearing Type | Ball Bearing |
Material | Bearing Steel |
Lubrication Type | Relubricatable |
O.D. Type | Spherical OD |
Dimension M | 0.179 in |
Dimension B2 | 0.720 in |
Series | Industrial |
Weight | 0.50 lb |
Sub Series | G1…KPPB2,3,4 |
Seal Type | Shroud Seal |
Outside Diameter D | 3.346 in |
Inner Ring Width B | 42.86 mm |
Outside Ring Width C | 22.000 mm |
Radius r | 0.6 mm |
Center of Bearing from End S | 21.4 mm |
Dimension S1 | 35 mm |
Set Screw Size | 3/8-16 |
Number of Set Screws | 2 |
Angle between Set Screws | 90 º |
Dimension B1 | 2.220 in |
Static Load Rating | 4600 lbf |
Dynamic Load Rating | 8160 lbf |
Recommended Products
-
SSAFS 22516 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve -
SSAFS 22517 x 2.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve -
SSAFS 22516 T SAF and SAW pillow blocks with bearings on an adapter sleeve -
SSAFS 22517 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve -
SSAFS 22516 SAF and SAW pillow blocks with bearings on an adapter sleeve -
SSAFS 22517 T SAF and SAW pillow blocks with bearings on an adapter sleeve