Single row cylindrical roller bearings
The single-row cylindrical roller bearing is one separable type bearing. Generally, a single-row cylindrical roller ring consists of four major components as follows: inner ring, outer ring, rollers, and cage. The rollers are typically guided by two ribs of bearing ring .
This kind of bearing is easy to assemble,disassemble and applicable for high-speed rotation cases. So, compared with a normal radial ball bearing with same size, the cylindrical roller bearing is more suitable to the condition which require to bear higher radial load and higher impact resistance.
Normally,it is not used to bear an axial load. It is required the angle between the axes of its inner and outer rings is slight, generally less than 4'. Profiling of the rollers and the raceway generatrix can reduce the inclination requirement somewhat.
We manufacture single row cylindrical roller bearings are available in several designs. The main difference is the configuration of the flanges. The most popular designs are N design,NU design,NJ design,NUP design.
- Bearing NU10/560
- 1 pcs
- Negotiable
- Bearing NU1044M
- 1 pcs
- Negotiable
- Bearing NU3338M
- 1 pcs
- Negotiable
- Bearing NU2244M
- 1 pcs
- Negotiable
- Bearing NJ220EM
- 1 pcs
- Negotiable
- Bearing N336M
- 1 pcs
- Negotiable
- Bearing NU1968M
- 1 pcs
- Negotiable
- Bearing N39/1180
- 1 pcs
- Negotiable
- Bearing NJ2324EM
- 1 pcs
- Negotiable
- Bearing NU230EM
- 1 pcs
- Negotiable