Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP100144530A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP152206750/YA6
- 1 pcs
- Negotiable
- Bearing FCDP100134450A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP114163594/YA6
- 1 pcs
- Negotiable
- Bearing FCDP92124320/YA3
- 1 pcs
- Negotiable
- Bearing FCDP1962721000/YA6
- 1 pcs
- Negotiable
- Bearing FCDP2503501370/YA6
- 1 pcs
- Negotiable
- Bearing FC3852168/YA3
- 1 pcs
- Negotiable
- Bearing FC1828105
- 1 pcs
- Negotiable
- Bearing FCDP1902721000/YA6
- 1 pcs
- Negotiable
- Bearing FCDP160216750/YA6
- 1 pcs
- Negotiable
- Bearing FCDP102146520/YA6
- 1 pcs
- Negotiable