Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP126184515
- 1 pcs
- Negotiable
- Bearing FC3246180
- 1 pcs
- Negotiable
- Bearing FCDP80112360/YA6
- 1 pcs
- Negotiable
- Bearing FCDP110160520A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP130184670/YA6
- 1 pcs
- Negotiable
- Bearing FCDP4062265/YA3
- 1 pcs
- Negotiable
- Bearing FC6084240/YA3
- 1 pcs
- Negotiable
- Bearing FC202880
- 1 pcs
- Negotiable
- Bearing FCDP170230840/YA6
- 1 pcs
- Negotiable
- Bearing FCDP150200670/YA6
- 1 pcs
- Negotiable
- Bearing FC5068170
- 1 pcs
- Negotiable
- Bearing FCDP96130340/YA3
- 1 pcs
- Negotiable