Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP198272760/YA6
- 1 pcs
- Negotiable
- Bearing FC3451180/YA3
- 1 pcs
- Negotiable
- Bearing FC4056170/YA3
- 1 pcs
- Negotiable
- Bearing FC5072220
- 1 pcs
- Negotiable
- Bearing FCDP146188500/YA6
- 1 pcs
- Negotiable
- Bearing FC4056170A
- 1 pcs
- Negotiable
- Bearing FCDP112164600A/YA6
- 1 pcs
- Negotiable
- Bearing FC3045120
- 1 pcs
- Negotiable
- Bearing FCDP72102380/YA3
- 1 pcs
- Negotiable
- Bearing FCD84112400
- 1 pcs
- Negotiable
- Bearing FCD5684280
- 1 pcs
- Negotiable
- Bearing FC3650168/YA3
- 1 pcs
- Negotiable