Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP109162580/YA6
- 1 pcs
- Negotiable
- Bearing FCDP120174640A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP114160514/YA6
- 1 pcs
- Negotiable
- Bearing FCDP2243161150/YA6
- 1 pcs
- Negotiable
- Bearing FC92124400/YA3
- 1 pcs
- Negotiable
- Bearing FCDP2403181050A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP106152520/YA6
- 1 pcs
- Negotiable
- Bearing FCD84112400
- 1 pcs
- Negotiable
- Bearing FC203074/YA3
- 1 pcs
- Negotiable
- Bearing FCDP2703701150/YA6
- 1 pcs
- Negotiable
- Bearing FCD84116320/YA3
- 1 pcs
- Negotiable
- Bearing FC3045120
- 1 pcs
- Negotiable