Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC3046150
- 1 pcs
- Negotiable
- Bearing FC6084240A/YA3
- 1 pcs
- Negotiable
- Bearing FC4464192
- 1 pcs
- Negotiable
- Bearing FC4666206/YA3
- 1 pcs
- Negotiable
- Bearing FC4462190
- 1 pcs
- Negotiable
- Bearing FCD4468210
- 1 pcs
- Negotiable
- Bearing FCDP100144400
- 1 pcs
- Negotiable
- Bearing FCDP196262880/YA6
- 1 pcs
- Negotiable
- Bearing FC4462190
- 1 pcs
- Negotiable
- Bearing FC6092270/YA3
- 1 pcs
- Negotiable
- Bearing FCDP92124400/YA6
- 1 pcs
- Negotiable
- Bearing FCDP92122322/YA6
- 1 pcs
- Negotiable