Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC4050200
- 1 pcs
- Negotiable
- Bearing FCDP110148510A/YA6
- 1 pcs
- Negotiable
- Bearing FC3650130
- 1 pcs
- Negotiable
- Bearing FC6490240/YA3
- 1 pcs
- Negotiable
- Bearing FCDP180256930/YA6
- 1 pcs
- Negotiable
- Bearing FCDP5280335/YA3
- 1 pcs
- Negotiable
- Bearing FC4462192/YA3
- 1 pcs
- Negotiable
- Bearing FC3448156
- 1 pcs
- Negotiable
- Bearing FCDP3204481300/YA6
- 1 pcs
- Negotiable
- Bearing FC4666170
- 1 pcs
- Negotiable
- Bearing FCDP120164550/YA6
- 1 pcs
- Negotiable
- Bearing FC3248124
- 1 pcs
- Negotiable