Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP80112360/YA6
- 1 pcs
- Negotiable
- Bearing FCDP76108400B/YA6
- 1 pcs
- Negotiable
- Bearing FCD5878190/YA3
- 1 pcs
- Negotiable
- Bearing FCDP172228750/YA6
- 1 pcs
- Negotiable
- Bearing FCD4460200
- 1 pcs
- Negotiable
- Bearing FC3248145/YA3
- 1 pcs
- Negotiable
- Bearing FCD102146520A/YA3
- 1 pcs
- Negotiable
- Bearing FC3044150/YA3
- 1 pcs
- Negotiable
- Bearing FC6084300/YA3
- 1 pcs
- Negotiable
- Bearing FCD84116320/YA3
- 1 pcs
- Negotiable
- Bearing FCDP130184670/YA6
- 1 pcs
- Negotiable
- Bearing FCDP140186620/YA6
- 1 pcs
- Negotiable