Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP96136500A/YA6
- 1 pcs
- Negotiable
- Bearing FC7496230/YA3
- 1 pcs
- Negotiable
- Bearing FCDP130180650/YA6
- 1 pcs
- Negotiable
- Bearing FCDP4872290/YA3
- 1 pcs
- Negotiable
- Bearing FCDP88128420/YA3
- 1 pcs
- Negotiable
- Bearing FCDP96136420/YA6
- 1 pcs
- Negotiable
- Bearing FCDP76104300/YA3
- 1 pcs
- Negotiable
- Bearing FC243390/YA3
- 1 pcs
- Negotiable
- Bearing FCDP82120440/YA6
- 1 pcs
- Negotiable
- Bearing FCD84124300
- 1 pcs
- Negotiable
- Bearing FC223492
- 1 pcs
- Negotiable
- Bearing FCDP170230650/YA6
- 1 pcs
- Negotiable