Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP170236650/YA6
- 1 pcs
- Negotiable
- Bearing FC6490240/YA3
- 1 pcs
- Negotiable
- Bearing FCDP134190690/YA6
- 1 pcs
- Negotiable
- Bearing FCDP76130360/YA6
- 1 pcs
- Negotiable
- Bearing FC3652120
- 1 pcs
- Negotiable
- Bearing FCDP120164550/YA6
- 1 pcs
- Negotiable
- Bearing FC4064216/YA3
- 1 pcs
- Negotiable
- Bearing FC4458192/YA3
- 1 pcs
- Negotiable
- Bearing FC3248168
- 1 pcs
- Negotiable
- Bearing FCDP1902721000/YA6
- 1 pcs
- Negotiable
- Bearing FCD78110400
- 1 pcs
- Negotiable
- Bearing FCDP6692340A/YA6
- 1 pcs
- Negotiable