Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FC5880180/YA3
- 1 pcs
- Negotiable
- Bearing FCDP200272800A/YA6
- 1 pcs
- Negotiable
- Bearing FCDP72108300/YA6
- 1 pcs
- Negotiable
- Bearing FC2842106
- 1 pcs
- Negotiable
- Bearing FCDP76108360/YA3
- 1 pcs
- Negotiable
- Bearing FC7296290/YA3
- 1 pcs
- Negotiable
- Bearing FCDP230300760/YA6
- 1 pcs
- Negotiable
- Bearing FCDP96136500A/YA6
- 1 pcs
- Negotiable
- Bearing FC5274220/YA3
- 1 pcs
- Negotiable
- Bearing FC84112280/YA3
- 1 pcs
- Negotiable
- Bearing FCDP198272760/YA6
- 1 pcs
- Negotiable
- Bearing FCD6080300/YA3
- 1 pcs
- Negotiable