Four row cylindrical roller bearings
SKF four-row cylindrical roller bearings are available in several designs:
- with a cylindrical or tapered bore
- open or sealed
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- Bearing FCDP6896350/YA3
- 1 pcs
- Negotiable
- Bearing FC3852168A
- 1 pcs
- Negotiable
- Bearing FC74108400/YA3
- 1 pcs
- Negotiable
- Bearing FC5884300/YA3
- 1 pcs
- Negotiable
- Bearing FCDP5280335/YA3
- 1 pcs
- Negotiable
- Bearing FC3246130/YA3
- 1 pcs
- Negotiable
- Bearing FC3652168/YA3
- 1 pcs
- Negotiable
- Bearing FCD4462225A/YA3
- 1 pcs
- Negotiable
- Bearing FC92124400/YA3
- 1 pcs
- Negotiable
- Bearing FCDP110148510/YA6
- 1 pcs
- Negotiable
- Bearing FCDP126184515
- 1 pcs
- Negotiable
- Bearing FCDP116170640/YA6
- 1 pcs
- Negotiable