Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- 3203 Budget Double Row Angular Contact Ball Bearing 17x40x17.5mm
- 1 pcs
- Negotiable
- Double Row Rear Carrier Bearing Upgrade Kit Honda TRX250X 1987-1992
- 1 pcs
- Negotiable
- 3309 Budget Double Row Angular Contact Ball Bearing 45x100x39.7mm
- 1 pcs
- Negotiable
- 3211 Budget Double Row Angular Contact Ball Bearing 55x100x33.3mm
- 1 pcs
- Negotiable
- 3211B.TV Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable
- F16036 Rubber Sealed Double Row Wheel Bearing 39x72x37mm
- 1 pcs
- Negotiable
- 4302B.TV Double Row Deep Groove Ball Bearing
- 1 pcs
- Negotiable
- Caterpillar Double Row Ball Bearing CT6V4274 CAT 6V4274 Forklift
- 1 pcs
- Negotiable
- 3201.2RS Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable
- 3318C3 Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable
- 3316C3 Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable