Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- NNC4914CV Rollway Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- TAM 1211 (55x100x21 mm) Double Row Self Aligning Ball Bearing
- 1 pcs
- Negotiable
- 1202 FAG Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 305803C2Z Budget Crowned Double Row Cam Roller Bearing 17x47x17.5mm
- 1 pcs
- Negotiable
- 3208 Budget Double Row Angular Contact Ball Bearing 40x80x30.2mm
- 1 pcs
- Negotiable
- 5413 Fafnir Angular Contact Ball Bearing Double Row
- 1 pcs
- Negotiable
- 3306 Angular Contact Ball Bearing Double Row
- 1 pcs
- Negotiable
- 3308 Budget Double Row Angular Contact Ball Bearing 40x90x36.5mm
- 1 pcs
- Negotiable
- 3205B.2RS.TV Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable