Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- NNCF5011CV Rollway Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- NN3012K W33 M SP IBC Bearings Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- 1305K C3 Nachi Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 745 DOUBLE ROW BALL BEARING DAC34660037 CHEVROLET OPEL CORSA
- 1 pcs
- Negotiable
- 11210 SELF ALIGNING BALL BEARING DOUBLE ROW EXTENDED - NEW - B135
- 1 pcs
- Negotiable
- BAH0011AB Open Type Double Row Wheel Bearing 43x82x37mm
- 1 pcs
- Negotiable
- NEW MRC 5210MG DOUBLE ROW BEARING 290L, STEEL/C3/ABEC-1
- 1 pcs
- Negotiable