Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- 2315K NTN Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- NAG4907UU IKO Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- 3320A Angular Contact Ball Bearing Double Row
- 1 pcs
- Negotiable
- 2310K NSK Nippon Seiko Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 1305K C3 Koyo Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- NAG4901 IKO Cylindrical Roller Bearing Double Row
- 1 pcs
- Negotiable
- 42072RS Budget Sealed Double Row Deep Groove Ball Bearing 35x72x23mm
- 1 pcs
- Negotiable
- 1306 HIC Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 3306 Budget Double Row Angular Contact Ball Bearing 30x72x30.2mm
- 1 pcs
- Negotiable
- 1215K Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable