Double row bearing
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SKF double row deep groove ball bearings are fitted with two snap-type, ball centred glass fibre reinforced PA66 cages (designation suffix TN9).
When used at high temperatures, some lubricants can have a detrimental effect on polyamide cages. For additional information about the suitability of cages, refer to Cages.
- 4304 20x52x21mm Double Row Deep Groove Ball Bearing
- 1 pcs
- Negotiable
- 7305B NSK Nippon Seiko Angular Contact Ball Bearing Double Row
- 1 pcs
- Negotiable
- 4303 17x47x19mm Double Row Deep Groove Ball Bearing
- 1 pcs
- Negotiable
- 4301 12x37x17mm Double Row Deep Groove Ball Bearing
- 1 pcs
- Negotiable
- 2306.2RS.TV FAG Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 4302 15x42x17mm Double Row Deep Groove Ball Bearing
- 1 pcs
- Negotiable
- 1215K J30 SNR Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 3304B.TV.C3 Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable
- RL9 JAF Self Aligning Ball Bearing Double Row
- 1 pcs
- Negotiable
- 7038MP.UA FAG Angular Contact Ball Bearing Double Row
- 1 pcs
- Negotiable
- 3210B.2Z.TV Double Row Angular Contact Ball Bearing
- 1 pcs
- Negotiable